Subject: 2 rotor + 1 rotor = 3 rotor???
From: Paul
Date: 6/9/2000, 7:53 AM

R c wrote:

Thanks for the info Paul.

A rotary hobbyist here in New Jersey put together a two stage rotary; a two
rotor mated to a single rotor via a clutch mechanism (he has too much time
on his hands).

I know that the eccentric shaft lobes in a 13b are at 180 degrees making it
impossible to add a third rotary because of uneven firing intervals.  What
has sparked my curiosity was the fact this can be accomplished if the third
rotor is on a second system.  Logic dictates that once the clutch in this
system is engaged that two systems would act as one big (and awkward) three
rotor right? or is my logic flawed?

Any one know what a three rotor 20b eccentric shaft cost?  Also, if it's a
two piece shaft how is it joined together? (I'm assuming that it would have
to be a new shaft)  the guys at racing beat couldn't give me price quote
until next week.

Also, where can I get a look at the four-rotor engine you mention.  If one
where put two 13b's together what should the offset angle be between the
second and third lobes?  90 degrees or 180 degrees?


Check on those Australian web sites listed on our site for the four rotors.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org