Sure, I will do that next monday. I brought my calipers last time and

the guy

said that the gear set ( the carrier and the six planetary  or pinion

gears)

would swap right over in place of the C-6 gearset. Here's where I make

an ass

of myself. I ASSumed that it fit into the ring gear, but if so, the sun

gear

must be smaller? for the higher ratio gearset than the C-6 gears if they

do

in fact both fit into the same ring gear.

Tracy, you mentioned that you were hoping that the gearset would swap

over.

Are you looking for a higher ratio for a specific purpose or just to be

able

to have the option without re-tooling your PSRU?  Sorry to have put out

the

information half cocked. I''ll get all the dimensions straightened out

next

monday.

Brian Trubee
Redmond, Wa

Tracy Crook wrote:

I'm happy with the old ratio (2.176 - 1) but would like to get a six pinion
planet carrier that would interchange with the C6 rear planet carrier.  Note
that the front carrier is different,

Tracy Crook
rws@altavista.net
www.rotaryaviation.com

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org