I took advantage of the offer of the free turbo II 2nd gen RX7
in Riverside CA. The guy is a long term rotary engine car owner
but he is now fed up. The combination of the super high cost of parts and
the materials that Mazda surrounds their engines with was just too much
for him.
He loves the engine but the car is nickel and dime-ing him to death.
I told him I would give him $300 for the engine and everything that
went along with it such as rads, computers, starter, etc., etc. and help
him take it out of the car. He could take the rest to the junkyard.
Real shame! The car body is in fine shape. Absolutely no rust. An aluminum
hood with scoop. Real wide wheels and tires with real nice mag rims.
We spent the day working on it mainly trying to save the wiring harness
so I could run the engine using the stock computer. Some of the connectors
just turned to dust when you attempted to disconnected them. Most of the
hoses were hard and rotten. The wires themselves were hard and brittle.
Perhaps it is the extra heat from the turbo.
Too bad Toyota does not make rotary engine cars. I am sure they could
do a much better job than Mazda with the little things that give
a lot of trouble over the long term.
I don't quite understand why Mazda is so fond of pneumatics. Surely much
of that air plumping could be done away with by programing the fuel flow
computer better.
Paul Lamar
You beat me to it, Paul. I sent him an e-mail as soon as I read your post,
but you were quicker. What are you going to do with your old engine?
Dave Leonard
I don't know yet Dave. I got the engine back to the hangar today and started to
strip it down. The owner had been complaining about not being able to get it to idle.
He messed with it for about a year and took it to several Mazda shops. Nobody
could figure it out. He is fairly familiar with electronics so he kludged up
a device to richen the mixture and make it idle. Wonder of wonders it passed
CA smog test. This was one of the reasons he was bummed out on the car.
Here is the reason it would not idle. This cracked rubber hose was underneath the
smog
pump and hidden from sight. It fed air to the turbo from the mass airflow
sensor. If I owned a turbo II I would strip as much stuff off it I could
and replace all the rotten rubber hoses and disintegrating plastic electrical
connectors. Must be dozens of little and big hoses on a Turbo II
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org