Subject: Three rotor turbo weight. Murphy Super Rebel.
From: Paul
Date: 6/18/2000, 7:53 AM

Old message from the ACRE NL Cd.


Chuck Harbert wrote:

Paul, I wish mine was that light. I've done everything I can to reduce the
weight including Inconel exhaust manifolds, lighter AL intake manifold, and
only a single turbo, I'm closer to 350 lbs., before I add Ross PSRU (38#),
motor mount (12#), radiator (8#), coolant and oil (20#), and not mentioning
the IVO prop (haven't weighed it yet). Altogether I'm about 420 lbs w/o
prop. Using the factory intake, throttle body, and exhaust manifolds, adds
another 40-50 lbs. Ask Brice, since he's using them in his plane. I
remember Tracy has the 20B weights in the back of his booklet. Now if I
could only remember where I put it?

It's still a lot lighter than a TIO-540 for the same 300 hp, and is a lot
less expensive(1/3).


I was quoting Rob Johnson when he told us the shipping crate holding the
three rotor complete was 400 pounds.



Don't complain :-) With a little boost and an intercooler you could
be getting 400 HP :-) Try that in your TIO-540 and you will melt
the valves or pop the tops off the cylinders. :-)

Paul

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org