This is from the Kis list but I think some of our people can use
the info.

"Randall, Paul A" wrote:

Further investigation revealed that Hysol was bought from EV Roberts, in
Culver City.  It is expensive: about $98 for a quart system.  A suitable
substitute is made by PTM & W (same folk who formulate the Aeropoxy resin we
use).  Their product is ES 6228 (not found in Spruce or Wicks), is good to
150 deg F (same as Hysol) has high peel strength (same as Hysol) and a 2 hr
working time.  It is thicker, though, which is actually better than Hysol.
They call it a "light paste".  Anyway, I bought a "quart system", which is
actually two full quarts, because this product is mixed at 1:1 ratio, unlike
Hysol which yields significantly less product.  It cost me 40 bucks.  If
anyone else is interested, they can be reached at 800-421-1518.

-Paul

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org