Subject: In tank fuel pump & scale model motor mounts.
From: Paul
Date: 6/19/2000, 9:11 AM

Ken Powell wrote:

What a coincidence.  I changed the in-tank pump on my 5.0 Mustang last
weekend (at 173,000 miles) with a '155 litre per hour' pump.  This pump
was $88 from a Ford performance shop.  The pump did not die, but this
car is still my daily driver (I seem to be spending every dollar that I
can come up with on airplanes and flying - I don't want a car not as
long as I can keep this one going) and I was afraid that it would quit
and leave me stranded.  I do not know what the symptoms are for a dying
in-tank pump, but I suspect they just quit without any warning.  I took
a picture of the mounting bracket and will scan it when I get the
pictures back - this looks like a good design to copy for aircraft
tanks.  I plan on using a similar bracket for my RV-4.

Ken Powell


Take some pictures of that mocked up motor mount Ken and scan them in 
if you want so I can see what it looks like. BTW here is a tip
for all you motor mount designers out there. Make a quarter scale model 
of the firewall and the motor mount using 3/16 square balsa wood.
You will be amazed about how much you can learn about the stiffness of
space frames using this technique. I started using this trick fourty years
ago when designing space frames for racing cars.

Paul Lamar

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org