Subject: Difference in Nickasil and Nitride
From: Paul
Date: 6/21/2000, 8:00 PM



Doug wrote:

What's the difference between nitride and nickecel (sp?). My sons dirt bike
cylinders are nicke...  .What is the history on aluminum end plates and how
could they be treated to withstand the heat and wear, I think that
discussion may have been before my time ...on line that is.    Listening and
Learning

Nitride is done on cast iron and steel and Nickasil is done on aluminum.
There appears to be only one outfit in the world that does a good job
on Nickasil and that is Maule of Germany.

Racing Beat sells aluminum end housings and they are the most developed
so far. Expensive! The first two intermediate housings you see in this
picture of a Racing Beat 900 HP turbo three rotor are aluminum.

Paul Lamar


Jeff Spitzer wrote:
Nitride is a process of hardening ferrous materials where the part is
heated in the presence of a gas that permiates and hardens the surface of
the material.  I forget the composition of the gas.

Nikasil is a coating built up on any surface that primarily consists of
silicon carbide particles suspended in a nickel matrix.  Maule originally
developed and now licenses nikasil.

Jeff Spitzer

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org