dsbarno wrote:
What is optimal turbine inlet temp for a rotary? How high would a
turbo with no intercooler at 5 psi or 10.15 inch boost be able to keep
a rotary to 100% power?
Barny
Jeff Spitzer wrote:
The answer to your question is simple and/or complicated. When one says
that they want 5 psi boost, what they really mean is they want MAP to be 40
inches. A single turbo can do a pressure ratio of about 3:1 which gives 40
inches up to just shy of 20K ft. If you go with 2 sequential turbos and
they each do 3:1 that's 9:1 which gives 40 inches up to about 45K. In any
case, once you reach the altitudes noted you can continue to climb at
reduced power (MAP). The danger is that the limits listed are the speed
limit of the turbo and unless you open the wastegate manually you'll
overspeed the turbo. (Note that the wastegate won't open due to high MAP)
That's why high altitude airplanes don't have simple wastegates. It's
usually not a problem for general aviation. BTW, our custom high altitude
turbos do better than 4:1 each and that's how we can go to 65,000 ft.
Jeff Spitzer
For you new guys Jeff is chief engineer at General Atomics Aircraft Division
in charge of most of the Predator high altitude RPV used by the US Airforce.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org