This is the mystery piece for today. Can anyone identify it? It was
attached to the lower intake manifold. (now I am really showing my ignorance
- if, after having to ask this question, anyone thinks I have no business
around this engine, please say so now :-)
Dave Leonard
The rotary emission system looks real complicated at first glance but it is
really quite simple. The principle is this. Mazda uses vacuum to power a bunch
of large servo valves. These valves route air (called aux air) from the smog pump to
various places in the exhaust and intake systems when needed to best burn
off the emissions.
These vacuum sources are controlled by small and cheap standardized solenoid
valves which are in turn electrically controlled by the computer. There usually is
a whole bank of these solenoid valves on the top of the
engine. The use of vacuum servo valves is cheaper than using large
and powerful solenoid valves to control the aux air supply directly.
It is mainly a question of cost. They are sort of force amplifiers similar to
electro hyd aerodynamic control surfaces servos found in airliners
such as ailerons, rudders and elevators.
Once this is known it becomes easier to understand and trouble
shoot the emissions system IMHO.
Improvements in ease of trouble shooting could be had at low cost
by color coding the vacuum hoses and putting light emitting diodes
on the top of the solenoid valves that lit up when that particular valve
was activated by the computer. This should lower the cost of service
and improve the resale value of the car.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org