Subject: Stuck seals in rotor.
From: Paul
Date: 6/28/2000, 4:01 PM



This has me buffaloed. Anybody seen this before?
The first picture is the bad side of the rotor. One
apex seal area is carboned up so bad on the side all the seals
in that area are stuck. The second photo is the good side.
Still pretty crudy but probably workable.

If we can solve this crude problem the engines ought to last
forever. The engine is in excellent shape except for this.

Paul Lamar

Bill Freeman wrote:

How about higher temps on one side than the other?

Bill

I need to inspect that oil o-ring carefully. I will get back on this
as there are some other things that may have caused it such as 
a failed oil thermostat in the nose of the crank melting the o-ring.
Could also be the use of the wrong O-ring.

I am beginning to wonder about the guy that rebuilt this engine.
I have never heard of or seen in any shop manual so far the use of 
three springs under each apex seal.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org