Subject: Coking on the side of the rotors.
From: Paul
Date: 6/29/2000, 6:57 AM


 The gasses from the EGR, the primary port oil injectors and carbon
that is pulled up from the combustion area and then pushed into the intake
port, then pushed into the rotor sides by the trailing side seal.

maybe then peripheral port engines would be better??

Tom

True peripheral ports would help.

Since we don't use EGR or the primary port oil injectors those two sources go
away. A switch to synthetic oil will cut down the carbon as it takes
a much higher temperature to convert it to carbon. As far as burning the
apex seal lube oil a switch to two cycle oil will solve that problem
completely as two cycle oil burn without residue. 

I was mainly curious about this as I don't see it as a problem in 
aircraft engine use.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org