Al Gietzen wrote:

Perry Mick wrote:

I use the heater port to my little cabin heat radiator, that is always
on, but the heated air is either dumped to the airstream or into the
cockpit.

Perry;

What heater core did you use for your cabin heater?

Al

Perry Mick wrote:

Actually it's a small "cross-flow" oil cooler, sold by J.C. Whitney,
about 1 X 3 X 9 inches I believe.  Two 1/2 inch pipe thread ports I
think, put in AN fittings and used standard automotive 5/8" heater hose.
May not be "aircraft" grade, but it's easily inspectable and replacable.

--
Perry J. Mick
Mick Duckt N7XR
http://www.ductedfan.com

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org