Perry Mick wrote:

Paul wrote:

Looks Good Perry. Is this still the Barry 22003 or is it the Barry 22002 mount?
1/2 inch bolts or 5/8 inch bolts? I see those cups helped out a lot
on bolt lengths. After it is welded up those cups can be cut at a 45
degree angle to save some more weight.

I already have the 22003 mounts so that is what I'm using.  The 5/8
bolts
and nuts are on order.


Perry J. Mick
Mick Duckt N7XR
http://www.ductedfan.com

OK. 22003 will be a bit stiffer but according to Vance that might be what
you need. Those 5/8 bolts will be a lot overkill and a bit heavy so
you could drill them with a 3/8 hole on a lathe. Stop short of the 
threaded portion.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org