OK. 22003 will be a bit stiffer but according to Vance that might be what
you need. Those 5/8 bolts will be a lot overkill and a bit heavy so
you could drill them with a 3/8 hole on a lathe. Stop short of the
threaded portion.

Paul Lamar

Bulent Aliev wrote:

On my 22003 mounts I made Delrin inserts with 5/16 bolt hole and pressed them in. This
way I can use smaller and much lighter AN bolts.
Bulent

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org