Subject: oil pump adapter,RX2
From: Paul
Date: 7/1/2000, 6:07 PM

sinkas wrote:

Well, here's the details,
   its actually registeered as a 71, as it was a rally car for most of its
life and was fitted with a roll cage eetc,
Its been poorly sprayed Red over the original green, which is a pity.
It has 15" alloys and 205-50 tyres.
 rear suspension is Bilstien with lowered springs
4.44:1 Mazda factory Race Limited Slip DIffenrential

  Engine is Jap spec EFI 12A turbo, rebuilt and extend/street ported. It
runs a 86-89 13 B spec turbocharger, with ported wastegate, making about
11psi boost. WOLF EMS efi system, MSD (Paul YAW ) Set up,
Lightweight flywheel, with heavy duty clutch and 12A turbo spec RX7 5 speed.
Front suspendion is KONI with heavy springs
Full roll cage and Almost ready to install 91 RX7 intercooler.
Exhaust is 3" mandrel with Aussie designed RE turbo muffler.

Sounds a bit too much race car for me. I was hoping for a restored
stree RX2 coupe like I used to drive back in the early 70's.

Thanks anyway.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org