Tracy Crook wrote:
Thats about what I was thinking too Paul. Tracy, I would like to hear
from
you about what if anything you do with the heater loop.
Mike Wills
I think the idea has some merit and it is one of the things I am installing
right now. Since I use two small radiators, it was a simple matter to route
the heater outlet to one of them and leave the other one connected to the
normal path. I started out last week intending to just change the gear
drive to the new version (larger but hollow prop shaft) but ended up doing a
bunch of things like electric flaps, intersection fairings for the wheel
pants, removing that ugly thing on the lower cowl where the Lycoming carb
usually goes, improving the cooling duct for the oil cooler, etc, etc, etc..
I'll let you know how it works when I fly it next week.
Tracy Crook
rws@altavista.net
www.rotaryaviation.com
How is my redrive and EFI system coming Tracy? :-)
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org