Subject: Mobil 1 AV was Re: Turbine oil
From: Paul
Date: 7/2/2000, 4:26 PM


Charlie Kuss wrote:

Paul
 Mobil 1 AV was blamed for eroding non ferrous metals out of certain
engines. It
was either copper or brass in a number of the bushings in the engines.
Elevated
amounts of these metals were found during oil analysis of affected
engines. This
occurred in a minority of engines. One of my friends was a mechanic at
Embry-Riddle
University during that time. They had fantastic results using Mobil 1AV.
Wear was
reduced by 90% . This was based on their fleet results at overhaul time.
Charlie Kuss
RV-8 priming 1 piece wing skins
Boca Raton, Fl.


Tracy Crook wrote:

My understanding of the Mobil 1 aircraft oil problem was that synthetic oil
did not hold metalic contamination (lead from the 100 LL in this case) in
suspension like mineral oil would and allowed it to accumulate between the
rings on the pistons where it would cause problems.   I think some people
came to the incorrect conclusion that the oil erroded the metal from the
engine.

I have used Mobil 1 in my engine for the past 800 hours.  The main factor
for me was the higher shear strength of synthetic oil which is of great
benefit to the re-drive gears.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com

Tracy can you take some pictures with your Sony Mavica of those
rotors from your 800 hour engine and upload them? I am really
curious about what they look like. If I owned it I would put
it back together with the old seals and new O-rings to see
how long it would last :-) Fix the thrust bearing of course.

Paul Lamar

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org