Subject: Alternator and water pump pulleys.
From: Paul
Date: 7/8/2000, 10:08 AM


norm2 wrote:

Also, Mazdatrix sells a pulley for the crank to slow down the belt
speeds.
I would not do the water pump pulley trick just yet. That is mainly for
racers that
will run the engine well over 8500 RPM.

Paul Lamar


Gary Buster wrote:

Wow, Paul... why not????   IMHO, this was the main reason I am able to not
replace alternators so often... the bearings just can't handle my 7k
continuous1-1.5 hour rides... I knew when the armatures were wearing when my
headset had a whinning that mimicked the engine rpms... replaced alt and the
whinning was gone (each time!)

with the engine getting close to the advertized cavitation speed, I went
ahead and replaced the pulley and slowed the stuff way down... hasn't hurt
any performance stuff, water is still the coolest thing on the ship!!!

I ask again... why not?... let me in on the rest of the story... what else
am I missing??

Gary Buster
Tyler, Texas
12a tandem gyro

Your PSRU is 2.85:1 (I think) Gary and most airplane guys are running 2.17:1.
We rarely see 6300 RPM. We cruise at 5000 RPM or less. Also you are running a
12A so we may need more water flow with a 13B. I don't think Tracy has changed
his e-shaft pulley and I also think he has not had alternator problems.

Paul Lamar

Ken Powell wrote:

I think that what we need to be using is a larger alternator pulley - probably
about 4" in diameter.  This will keep the water pump speed up (which we want for
increased flow) while reducing the alternator speed.  I think that ACS sells an
alternator pulley for a 15MM shaft that will fit most of the Jap alternators.
What do you think?

Ken P.


Sounds good to me Ken.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org