George Lendich wrote:
Bill,
I have been trying to get some info on his(Art's) PSRUs for some time now,
do you know
the basis of his construction.
TIA
George (down under)
I forgot to mention, Art did all of the gear reduction design and fab.
then
the machine work to mate it to the 13B and provide for the starter. The
gear
reduction is 8 3/8" long. Being shorter, it permits using Van's
dynafocal
mount without modification. The CG will be alittle further forward than
it
would be be cutting up Van's mount and using a longer gear reduction, but
it
will be the same as with my previous six cylinder Subaru.
Bill Hughes
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org