Bulent Aliev wrote:

Paul wrote:

If I cut it Bulent you will have to weld on it so you might as well go
the whole route. Do you have the part that holds the pressure cap?
The pressure cap must be placed in the highest point of the system.

OK Paul, I can cut it down and weld it myself Thanks for looking at it. I needed a
second opinion.
Bulent

I'll cut it and machine it out if you want. No charge. You weld.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org