Subject: Would you buy a rotary engine from this man?
From: Paul
Date: 7/8/2000, 9:34 AM

I would. This is Dennis Hayes from Hayes Rotary Engineering in Redmond WA.
Dennis worked as an engineer for Douglas for eight years and then 
started Hayes Rotary engineering 24 years ago. He has seen a lot of rotary
engines apart and needless to say he is very knowledgeable on the subject.
He let me have free run of the shop with its dyno and rotary engine
parts stacked floor to ceiling. Dennis has a collection of five gallon
cans of carb cleaner that numbers into the dozens. There are half a dozen
people working in the shop rebuilding rotary engines. He also, BTW, has a collection
of Suziki rotary motor cycles that he may be persuaded to part with one
or two.

Dennis is also very above board and forthcoming. He will answer any question. 
Just call him as he does not spend a lot of time on the Internet. Currently he 
is developing a drag race transmission on his dyno for rotary engines.

http://www.hayesrotary.com/

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org