carlos noto wrote:
Mr. Lamar how are you?
I'll like to ask you some thing Mr. Lamar since you have more experience
in
aviation than I do. What do you think about this engine " Hirth F30-FP24
it
produce 120hp and only weigh 101lb", not including alternator.
The Leon brother has in there Cozy IV 2 Isuzu engines producing 100hp.
They can maintain 8,000 feet with only one engine. Do you think the Hirth
F30-FP24 engine are suitable for the application I'm trying to make? This
engine are really small. They are aviation 2 cycle engine.
Yes I think they will work. I think two cycle engines would be a lot more
reliable with a good EFI system that monitored EGT and CHT so the fuel
injection
computer could richen it up in the event of bad temperature situation
to prevent seizure. The TBO would be much shorter than a rotary of course.
The fuel burn would also be much higher.
Paul Lamar
Howard wrote:
I would like to point out that there are fuel injected two cycle engines....
and then there are direct injection two cycle engines....... The Mercury
Optimax has proved beyond a doubt that with gas direct injection a two cycle
can have the economy of a 4 cycle..... with computer regulated oil
injection very little if any plug fouling occurs and oil usage is greatly
reduced, and they can have a long TBO..... The two cycle engine is truly
coming of age. When they come up with the direct injection two cycle that
uses something other than the crankcase as a compressor, and has full
pressure lubricated sleeve bearings like a real engine, they will be hard to
top.
H.W.
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org