Subject: 3 springs/ chatter/ vibration
From: Paul
Date: 7/10/2000, 2:52 PM

No apex seal in and out, therefor, no jump.

Paul Lamar


Not true.  The apex of the rotor follows a trochoidal path regardless of
whether the housing does!  The seal experiences an acceleration vs. time of
something close to a trochoid depending on it's motion.  In any case,
approaching the minor axis the apex of the rotor has a velocity component
inward.  As the apex passes the minor axis the velocity component switches
to outward.  This means that the seal must be accelerated outward (by the
springs)  If its not, it jumps from the housing.  If you want to reduce
jump then you would reshape the minor axis area to cause MORE seal movement
within the slot in such a way to reduce the trochoidal motion and "smooth
it out"

Jeff Spitzer

I left right after I uploaded that and on  the way up to the hangar I said;
"Oh xxxx I forgot about the seal acceleration" I had no idea it changed from
positive to negative at that point however.

Ah yes here it is. Centripetal is acceleration inward. Sorry.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Apex-seal-accleration.gif