Subject: Bulents 13B Cosmo water pump.
From: Paul
Date: 7/10/2000, 3:30 PM

Here it is after I made the second cut and milled out the partition.
I about doubled the area of the return passage out of the block
through the pump. the area is now about the same as the 1-1/4 inch ID
input and return pipes to the pump and from the pump.
 
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Bulent-pump-after-mill.jpg