Subject: How do you set timing on a '91 rotary
From: Paul
Date: 7/12/2000, 3:18 PM

Ken Powell wrote:

Richard,
I had a similar problem on the 1st rotary that I rebuilt.  I had installed the
crank angle sensor 'off' by 1 tooth.  The engine would run, but the exhaust
manifold would glow red.  When I finally rotated the CAS by one tooth and
retimed the engine, it ran great.  I had a really hard time finding my error
because I thought that I had probably installed some of the smog stuff
incorrectly.

Ken P.

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org