Perry Mick wrote:

The downgoing strut wanted to intersect the lower water pump
port right in the middle.  Also, the idea I had about putting
the plate between the water pump and engine also won't work,
too much blockage by the water pump.

But this looks like it might.  The upper right 1.75 inch tube is
7 inches long, the remaining three are 3 inches long.  Put
gussets in.  Let me know what you think about this.

--
Perry J. Mick
Duckt N7XR
http://www.ductedfan.com

I am going to print this out and take it up to the hangar and
compare it with the actual engine. Will get back to you next 
week.
 
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org