| Subject: aluminum tube bending |
| From: Paul |
| Date: 7/13/2000, 7:12 PM |
"Terry S. Wilson" wrote:
A machinist I worked with once, had to fabricate a decreasing radius continuous bend of several revolutions of tubing. He very cleverly, I thought, made a mandrel on the lathe and (this may apply here) filled the tubing with cerro bend,(pardon my spelling). After the process was completed he went over to the Insta-hot at the sink and melted the filler out.
The Aircraft Rotary Engine Newsletter. Powered by Linux. http://home.earthlink.net/~rotaryeng/ http://www.linux.org