Subject: Bob Darrah's water pump.
From: Paul
Date: 7/17/2000, 7:13 AM


My homemade water pump has a 4 inch impeller and 1 1/8 id in and out.  But I
have got to check it at 6500 RPM before I dare put it on the engine.  BIG
pulley on the driving motor!  I don't know if I have a motor big enough to
drive it at that speed.
Bob Darrah

Mark Steitle wrote:

         Reply to:   RE: Tracy's well pump.
Bob,
I have a 5 hp, 110v tablesaw motor that you can use.  You have my number.
Mark

Bob how high is the pump inlet from the water supply?
Please raise the pump in six inch increments and report the change in flow
at a give RPM. I am curious what this factor has to do with our
installations as invariably the pump inlet is above the rad.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org