Subject: Smoke coming out of engine-fi leaking.
From: Paul
Date: 7/17/2000, 4:09 PM



This is a typical rx7 problem brought upon by leaking fuel injectors that
drip fuel and wash the oil off the rotor housing causing hard starting
because of no compression. If you haven't serviced the injectors, I suggest
you forget the more drastic solutions and try this first.
1. Clean and replace the injectors, or..........
2. Depending on year, push down all the way on the gas pedal, and crank for 5
secs then let go. It will start if it hasn't sit for 2 long. Full accelerator
disables the fi circuit and no fuel is sent upon startup.
3. Remove spark plugs and put a teaspoon of auto tranny fluid in there to
build up compression if it has sat for a long time. Will smoke like hell.

These are well known fixes.
Don't take the engine apart for just this reason.
Marc Wiese

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org