Subject: Water flow in rotor housing
From: Paul
Date: 7/17/2000, 8:55 PM

Here is a good picture of the water passages in a rotor housing.
This is from the back of the engine looking forward.
The plugs are on the left side. As you can see there is plenty
of passages with large areas starting from the plugs and going 
counter clock wise all the way around to the exhaust port on the right
side of the housing. This is by far the hottest part of the
rotor housing and it make no sense what so ever to restrict the
water flow in this area. 

Also it make no sense to rotate the engine with the plugs up. 
Vapor rises and Mazda designed every part of the cooling system to 
purge the vapor. If you mount the engine with the plugs up you are just
plain asking for trouble.

Note the tiny holes in the top of the rotor housing. These are
there because this is the cool part of the engine and little water
flow is needed to cool it.
 
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

rotor-housing-cooling-pass.jpg