Ernesto Sanchez wrote:

This add is from the parts trader: http://www.thepartstrader.com/

David A. |  drrotary@yahoo.com  |  Tacoma, WA  |  PH: 8487776
 A set of inner & Outer Oil control O rings 65.00 for the set to do both
rotors (fit inside the metal oil ring). These are made of viton and can
handle up to 400 degrees of heat vs. the stock Mazda ones. I have several
sets in stock. Other rotary engine parts available. Thanks Dave 253-848-7776

Are these the same type of o-ring that you are going to try Paul?

Ernesto

No. Ours and Hayes Rotary Engineering O-rings are Teflon encapsulated silicone 
which is reputed to be the most chemically inert and highest temp 
O-rings you can get. Teflon is good to 700 F and silicone is good to 500 F.

$65 dollars is not a bad prices as there are eight O-rings in the
oil ring set. Hayes is charging $25 each for the big ones and ours
are going to be around $15 each regardless of the size bought
in a complete engine set of 16 O-rings. About $240 for the complete
set.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org