Ian Beadle wrote:

I would like to receive the newsletter.
Have just completed RV6A with 13b injected, ported,
and on ground cooling problem!

Thanks  Ian Beadle Western Australia.

You are not alone Ian. Lots of people have had problems with ground cooling.
Send some pictures if you can and tell us the details of what you are 
using. This does not necessarily mean it will not cool in the air
at 100 MPH or above. I think we can help.

Height width and thickness of rad core(s)? 

Size of hose from water pump to rad and back?

Have you taken out the thermostat and plugged the bypass hole
in the pump?

Location of rad cores?

Height, width and thickness of oil cooler core? 

Location?

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org