Russell Kent wrote:
Paul wrote:
Maybe we could use a model airplane rotary to power our APU.
Doubtful. Auto A/C compressors are notorious for sucking down HP. I assume that some small-ish system
will be used, such as one from a Geo or Toyota Tercel. WAG says plan on 5 HP for A/C. If you want a
backup alternator (not a bad idea considering the extra electrical load the fan is going to cause), then
you need to add a few more HP. So basically we need a 8-10 HP package.
1. Does the model airplane rotary have that much power?
Every model airplane engine I've seen (and I've seen alot since my Dad is a big R/C flyer) runs in the
many, many thousand RPM range. Redline is usually 18K or so, and normal operating RPM is 10K+. Neither
the A/C compressor nor the alternator will tolerate those speeds. So now we're back to making PSRU's
again.
2. Is the model airplane rotary's useful RPM range anywhere near what the accessories need?
I'd guess that the model airplane rotary runs on model airplane 4-stroke fuel. I dunno if it is adaptable
to Mogas or Avgas. Carrying 2 types of fuel is gonna be a real turn off. We're already advocating
carrying two-stroke oil to mix with the fuel (or add to the header tank).
3. Can the model airplane rotary run on Avgas?
I think the answers are "no", "no", and "no". Sorry Paul.
Now, one of those rotary snowmobile engines might work: useful HP, useful RPM, aircooled, runs on Mogas.
The problem there is availability.
Russell Kent
I was only half serious about the model aircraft rotary.
Snow mobile engines would be too heavy. Sachs made some rotary
lawn mower engines. Here is a picture of a Pats 10 KW APU using a Norton
motor cycle one rotor. Used in biz jets burning Jet A.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org