Subject: Mystery BSFC
From: Paul
Date: 7/21/2000, 7:29 AM

Howard wrote:

Thanks Paul.....  That makes sense.

    Personally I think fuel consumption figures for decent modern 4 cycle
engines are not worth worrying about.....  not much difference one to the
next......   Lots of folks making outrageous claims ......    like a 100 hp
engine that burns 2.5 GPM.... etc....    What's happening is they are taking
a cruise figure and implying that full power is achieved at that fuel
burn.....

    I told Bill to forget fuel burn considerations.....  the only concerns
are will the engine produce enough power to do the job, is it light enough
(power to weight ratio), and will it be dependable at the power required.
Answers to the first and last question are definitely yes...... the second
is highly questionable in my mind considering the application..... It'll
work but is less than ideal.     I sure wish there was a good supply of the
A series Continental engines.... they were as close to perfect for many of
these applications as anything made.

                    H.W.

The Soob appears to a be a pretty good engine if you don't ask too
much from it. I would say around 100 HP is about right. You can pump
any engine up. That does not mean it is going to live at those elevated
HP levels.

Much fuel consumption depends on how you lean an engine. Also 
the exhaust valve dependability is going to depend on how well 
you lean it. If you screw up you can kiss your exhaust valves 
good bye. Need I mention the rotary has no exhaust valves? :-)

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org