"Michael D. Callahan" wrote:
Paul,
I am also a big fan of the Wankel, that's why I have owned a few and
still own my RE-5. The point I was trying to make is that if some guy comes
in saying he has found an engine to put in an airplane he is building and is
told to forget trying to do it himself and to just go spend $3500 on a
Atkins or Turrentine , then sees that he has to buy a redrive, EEC, and
cooling system, he'll probably go get a Subaru from the junkyard.
This is a newsletter to encourage those who want to build rotary powered
airplanes, not for those who want to buy rotary powered airplanes.
Well I'm headed to Oshkosh on Monday, you goin'? Mike C.
I agree with that Michael. Course some people have more money than time
and believe, like I do, the Wankel rotary is better than any piston engine
for aircraft use at any cost. Ironically Tracy has pushed the low cost aspect
of it then turned around and bought an engine from Bruce :-)
I think the engine is much easier to overhaul than any piston engine
and I have now done both. There are no valves to grind or replace and you rarely
have to replace or grind a shaft journal. Worst case you send the end housings out
for lapping and re-nitriding, replace the rotor housings and seals
and put in Teflon encapsulated O-rings and the engine is better than new
for less than about $2000 total including a core. The Teflon encapsulated O-rings
are optional at about a $150 over the stock Mazda O-rings. They
provide a little extra fool proofing on over heating.
Yep I will be at OSH. You are welcome to join us for dinner on Wed, Thurs.,
Friday and any other day but I will not be at the dinner on Sat as I have
a Kis dinner to go to. We usually meet at Tracy's plane or on the North
side of the control tower slope at noon. I will be wearing a beige Aussi
outback hat with a I love Flying my Mazda Rotary button on it.
BTW I will have a set of the Teflon encapsulated O-rings with me for
a show and tell.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org