Bulent Aliev wrote:
Beautiful bottle Norm, will hate to weld the rad. cap on it and melt away the
nice plastic coating. My pump after all the "surgery" by Dr Lamar does not have
a filler cap and the overflow bottle should have one. If someone has better idea
please let me know.
You don't need a separate pressure bottle Bulent.
Weld part B to part D. See the picture below.
Send me part A and I will cut it off and convert it to part B. If you don't
have one you can buy one of these either in a junk yard or from a Mazda
dealer. Part C can also be bought at an Mazda dealer ship and it is standard
on most 13Bs. The only other thing you need is an overflow tank.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org