Subject: Diesel fuel and gasoline safety
From: Paul
Date: 7/24/2000, 2:06 PM


The liquid in the ANFO style bomb is used as a mechanical connection between the high train initiator and the fuel. Amonium nitrate, 96% pure or better. It is not important what the liquid is, as long as its flamable. In the plastic drum with no brisanse (I forgot how to spell it) Resistance to being ruptured, the fusing would have to be in the center of the drum and vertical. Primer cord wound on a broom stick, or 60/40 in a piece of water pipe with electric caps. Anfo makes a poor performing bomb, and it takes a very fast explosive to set it off. Its only advantage is that is easy to buy the main component. The pressure wave it generates is very low in power. Around 33,000 PSI. The wave diminishes in pressure at the cube of distance. While the wave could have failed one or two colums close to the bomb in a bending load it could not have shattered them leaving only the rebar. The concrete will remain intact up to about 3500 PSI. And it sure as hell didn't shatter colums 4 r!
ows deep inside the building. 

The ANFO bomb that exploded in the street, did not destroy the building. It had help. Just like Lee Harvey Oswald, just like flight 800. Jet A was developed to prevent just that situation. 

SOP on every 747 flight is to pump the center tank dry for long flights. The red herring that the air conditioners had overheated the remaing 300 or so gallons is ignorant. The fuel had just been at 35,000 feet within 2 hours of departure. How hot was the remaining fuel? 15 degrees?
25 degrees? They don't smear missile fuel on the seats just to train bomb sniffing dogs!

Lynn E Hanover

Things should clear up in years to come.

Paul Lamar

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org