Subject: What exactly are they made of?
From: Paul
Date: 8/10/2000, 3:03 PM



R c wrote:

Does anyone know what grade or what type of aluminum alloy is used to
make
rotor housings?  Does anyone know at what temperature this material is
cast
at? Does anyone know if the aluminum portion of the housing is heat
treated
at all?

Thanks.


SAE 322 (I think. Hard to read the photocopy)

This I am sure of AC-4D-T6  Si 5%, Cu 1.2% Mg 0.5%
Die cast under "high pressure".

Paul Lamar

Howard wrote:

I strongly suspect that the alloy is simply a typical high silicone casting
alloy.... probably nothing particularly special.   If one looks at the
construction of these housings it is obvious that special high strength
stuff really isn't necessary.   The technology is in the precision machining
chrome plating, and finishing of the wear surfaces.     Casting alloys are
somewhat different materials from what we are used to dealing with.   Most
of the structural aluminum alloys are not really castable.   I suspect that
356 or something very similar is used.   It doesn't take rocket science to
produce a casting adequately strong for this application.   The main
consideration here is probably that the material be compatable with the
plating process.   Chrome plating on aluminum is a bit different than on
steel or iron that is to say more difficult.

                                  H.W.

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org