Hi Guys;
       Here's the scoop....I committed to a 50pc. order
a few days ago in order to get the machine shop to
program and crunch out the POC, which after inspection
will be forwarded to Paul for his scrutiny & approval
(Paul it would be great if you have the time and tubing
to test one under pressure (tap water/city pressure)
glued with epoxy and flex-wiggle-rotate the assy.), in
other words try to get the seal to leak).

Sure no problem. Lots of tubing. PL

The roster is as follows:(in the order they came in)

   Butch Diaz Sr............6pcs.
   Paul Lamar...............  "
   Ernesto Sanchez..........5pcs.
   Gary Palmer..............6pcs.
   Mark Steitle.............  "
   Al Gietzen...............2pcs.(Al I'll see about the
                                  the 1.5 bore)
   Peter Nunn...............6pcs.
   John Slade...............5pcs.
   Perry Cason..............  "
   Mike Pienar..............6pcs.
   Ken Gillanders...........4pcs.
   Mark Wiese...............6pcs.

Please feel free to correct or add. Final order qty.
will be tallied after POC approval.

Paul to answer your question: It will simpler if I ship
them from here.(East coast)
                   Regards
                Butch Diaz Sr.

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org