VO wrote:

Vlad 16" of tube

Brian,
Did you see, I was worried about availability of Inconel and it has leg to
stay...

I would like to change my order to:
-  5 ft of 3 inch OD 0.035 wall
- 10 ft of 5 inch OD 0.035 wall
- 20 ft of 2 inch OD 0.035 wall
- 2 sq. ft of 3/8 (if not available, then 1/4 ) inch plate.

Paul, please comment,

some fellows would like to use 0.065 thickness for pipes, instead 0.035
perhaps it make sense (or not too much ?). I need this for 20B NA engine setup.
Also, there is enough to have above quantity (with 10% extra included and
muffler also) for
complete 20B installation or not (or it is too much?) ? Please advise.
Thanks!

If it is make sense, perhaps for order simplification, we need to order same
thickness for all. Or not... Please advise.
Thanks!
Vlad
N1UT - Velocity Elite RG, 20B NA

Well I think most people think .035 wall Inconel is plenty thick enough.
Tracy has been running .035 SS for quite awhile.
0.065 wall will be twice as heavy but it will certainly work well.
I really don't think we will have much of a choice. I think we will
have to take what ever Boeing surplus has unless you want to buy it
new.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org