Subject: Wiggins coupling & rads
From: Paul
Date: 8/11/2000, 11:34 AM

Byron Ward wrote:

They seem to be gathering pressure drop info for me on both coolant
and air pressure drops. I requested info at 30 to 40 GPM on the coolant side
and 80 to 100 MPH on the air side. If anybody is interested in other data
points let me know. I forgot to ask for temp drops at typical flow rates.
It would be too much to expect for them to have data over a much wider
range.  I have yet to find a lab that is doing applied research on
automotive rads.

Paul,

I'm a student at the University of Michigan, working on a student airplane
design currently. Anyway the room where the engine for this
airplane is located has a wind tunnel that is used for testing automotive
radiators. I don't know anything about it, just happened to see the setup.
I can try to find out more about the work being done there if you are
interested.

Byron

I am most definitely interested. I can send you a stock Mazda second gen turbo 
rad core and a Ford Taurus rad core that you could test for air pressure drop.
This could give us some idea of what is going on. In fact when you get it set
up I could fly up and observe the tests. I have some friends near there
that I can stay with.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org