Subject: What exactly will the melt at??
From: Paul
Date: 8/12/2000, 4:59 PM


I have a kiln and a few rotor housings that would make great paper
weights.
 > The thought came in to my mind of melting down the aluminum portion of
the
 > housing and pouring it into a mold of something.  I have no practical
 > application for this as of yet, I'm just fooling around with my kiln and
 > hoping to cast something in green sand.  I guess you could say that I
have
 > some idle time to experiment with!  I'm not even sure if my kiln will
melt
 > the aluminum.  Has anyone here ever fooled around with making aluminum
 > castings?is there a special process that one has to follow or is it just
a
 > straight forward pour
 > Rc

How about some intake manifolds or thermostat covers for us all?  :-)

Dave Leonard

Bulent Aliev wrote:

I have seen aluminum pan melt when forgoten on the stove. Also you may be able to
make plaster molds, but make sure they are 100% dry, or they will crack.


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org