Subject: Indiviual coils vs individual coils with ignitors and Mitchell's book.
From: Paul
Date: 8/15/2000, 11:50 AM


Tracy,
I am planning a 20b a/c installation and would like to use 6 small
plugs-on coils, similar to the Power Sport applications.  I have found a
similar unit (appears to be identical to the Mustang coils) used on the
1999
32v 4.6L Ford Mustangs, 1999 SHO Taurus and Lincoln MkVIII.  They're about
the size of a D-cell battery, with two leads for the primary, and fits
right
over the spark plug.  It would require six individual coils, one per plug.
I imagine that this setup would be much like Bob Darah's six coil
application.  Can the EC2 accommodate this coil setup?  Thanks,
Mark Steitle
Lancair ES/20b


Tracy Crook wrote:

The EC2 is designed to work with coil-ignitor units like the one I
specified
awhile back (like Bob Darah is using).  If the unit you mentioned is really
just a coil (with two primary leads) the EC2 will not work without an
external ignitor to drive the coils.

Tracy

Mike Wills wrote:

Tracy,

  Obviously I'm not the only one interested in a coil on plug installation.
And I must have missed the previous post that you refer to. So for Mark and
myself can you (or Bob Darrah) repost a specific part number and/or
application for the EC2 compatible coil/ignitor assembly for use in a coil
on plug installation?

  If using a pure coil such as the ones Mark mentions can you provide a
part number for a compatible external ignitor?

Thanks,

Mike Wills


There is a book published called Mitchell's International Inc. "Electronic 
Fuel Injection Component Diagnosis & Testing Guide Published" by Fisher BOOKS 
(520) 744 6110 Tucson AZ. Therein are all schematics and other sensor data.
Unfortunately the only one I have at the moment is the 1983 to 1995 Domestic 
Vehicles edition. 

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org