Subject: Indiviual coils vs individual coils with ignitors
From: Paul
Date: 8/15/2000, 2:17 PM


Tracy,
I am planning a 20b a/c installation and would like to use 6 small
plugs-on coils, similar to the Power Sport applications.  I have
found a
similar unit (appears to be identical to the Mustang coils) used on
the
1999
32v 4.6L Ford Mustangs, 1999 SHO Taurus and Lincoln MkVIII.  They're
about
the size of a D-cell battery, with two leads for the primary, and
fits
right
over the spark plug.  It would require six individual coils, one per
plug.
I imagine that this setup would be much like Bob Darah's six coil
application.  Can the EC2 accommodate this coil setup?  Thanks,
Mark Steitle
Lancair ES/20b


Tracy Crook wrote:

The EC2 is designed to work with coil-ignitor units like the one I
specified
awhile back (like Bob Darah is using).  If the unit you mentioned is
really
just a coil (with two primary leads) the EC2 will not work without
an
external ignitor to drive the coils.

Tracy

Mike Wills wrote:

Tracy,

  Obviously I'm not the only one interested in a coil on plug
installation.
And I must have missed the previous post that you refer to. So for Mark
and
myself can you (or Bob Darrah) repost a specific part number and/or
application for the EC2 compatible coil/ignitor assembly for use in a
coil
on plug installation?

  If using a pure coil such as the ones Mark mentions can you provide a
part number for a compatible external ignitor?

Thanks,

Mike Wills



Tracy Crook wrote:

Part # for the AC Delco coil/igniter is 12558948.  (made by NipponDenso)
This is a "coil near plug " design which uses a short wire between coil &
plug.  Don't have any suggestion on what ignitor to use but I'm sure there
are many that would work.  Just don't have time to research it now.

Tracy

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org