Subject: 13Brew to 20B ?
From: Paul
Date: 8/16/2000, 10:50 PM


<< OK Marc what is Bruce talking about converting 13BREW into a 20B? >>

Looks like he may have spliced a shaft (and used a lot of machine
tooling)!
We will have to wait for the video, here is the picture he sent me.
Somebody
else in www.grannys.com (?) has done one too, and has it on the web.

Marc Wiese 20B .....


Tracy Crook wrote:

Bruce does not do anything with the E-shaft.  What he does is start with a
13BREW, add the 20B Eshaft and intermediate housing (and a few other small
bits) and makes a 20B out of it.  This version of the 20B will mate to my
redrive with no mods.  The "pure" Japan spec 20B is missing a bolt hole on
the bellhousing end where the starter mounts.  This type needs an additional
bracket between the starter mounting holes and redrive adapter plate to
compensate for the "missing" hole.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org