Subject: Unusual wear on rotor housing.
From: Paul
Date: 8/17/2000, 3:10 PM


Paul wrote:

I find this very interesting. I think it is some how related
to the oil injection. See how the wear pattern spreads out as
the seal progresses towards the combustion chamber.
Note the chatter marks.
One scenario is the oil is not spreading out fast enough after it is injected.
With oil mixed with the fuel this cannot happen.

Paul Lamar



Marc Pedings wrote:


Very interesting indeed... I have two housings that look almost identical to
this.  It is from an 86 NA 13B.  And... you guessed it.  The oil injection lines
were all broken ( very oily under the car that I pulled it from ).  I'm mixing my
oil/fuel.....

Marc Pedings

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org