I just got back from the east coast, and am doing an overtime shift before

going to Oregon for the next week. Sorry I am so busy this month. That's
just how the summers go. Here is the tally that I'm giving to the metals guy
over at Boeing.

5" dia .035 tube
Paul   10'
Ernesto Sanchez 44"
Vlad   16'
Gary Palmer  4'
Perry Casson 4'
Archie- Max lengths UPS able- let's say 2  5' lengths
Galen Lerol 5'
Me          5'
Total        ~60'   5" dia .035 thick tube

2" plate

Paul  2 sq. ft.
Ernesto 12"x44" / ~4 sq. ft.
Marc Weise 4 sq. ft.
Perry Casson 10" x 7"
John Slade  2 sq. ft.
Me  1 sq. ft.

total  ~ 14 sq. ft.  .2" plate

Odds 'n' ends ( I'll ask but don't know what we'll get if anything)

3" dia .035 thick tube
Paul  5'
Ernesto let's say 4'
Ken Gillanders let's say 5'
 Total  14' of 3" dia .035 thick tube

2" dia .035 thick tube
Jeff Spitzer Max length UPS able let's say 5'

2.25" dia .035 thick tube
Marc Weise 6'

I'm faxing this request to the guy at Boeing. We'll see what we get. Sorry

I've been so busy this month. Thanks for everyone's patience so far.
Hopefully we'll all get some Inconel out of this. Hope this will advance the
cause of rotary engine aviation.

Paul- do you think you could get up here to see Boeing surplus? You really

ought to see this place.

Brian Trubee
Redmond, Wa

Yes I can. Let me know when a good time is for you. I will bring my check book
and digital camera. Do they take checks?

Jeff Spitzer wrote:

I'll take a couple of those 5' long 2"x.035 and I remember one other guy
saying he wanted some too.  I also wanted some 3" dia tube and 3/8 plate.
Thanks

Jeff Spitzer

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org