Subject: N993FL pictures and numbers
From: Paul
Date: 8/22/2000, 1:06 PM


Finn Lassen.

I built an RV-4 and had a heavy wing.

Van Has a description of how to sharpen (pinch) the trailing edge of the
light wing to correct this problem.

It is very inlikely that you have a wing out of rig.

Also check the aligbment of your flaps.

Hank - San Mateo, Ca. LNC2 Rotary


Finn Lassen wrote:

Thanks Hank.

I'm aware of the method of squeezing the trailing edge of the ailerons.
However it is very likely that I have a difference in wing incidence. I
appeared to have a "washed out" right wing rather that straight and so I tried
to set the incidence at some average point. I also have a crooked left aileron
(about 7 degrees twist).

The reason I think it's the right wing is that the faster I go the more left
rudder I need to keep the ball centered (induced drag from higher incidence
right wing) and right aileron to keep wings level (right wing more lift).

But we're getting off the subject here and should take this discussion over to
the RV-list.

Finn 

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org