Paul,
I though you and others on this newsletter would like to see this. I'm sure
if we all got together, we could get a break on some bends. I am planning on
using some of the aluminum bends for an intake manifold, and some inconel
bends for an exhaust, along with some of the inconel that  we will get from
Boeing. It maight get expensive to build an intake and exhaust with materials
from Burns, but compare the costs with that of an exhaust system for a
Lycoming/RV-4 in A/C spruce.
Brian Trubee

Subject: Re: Inconel
Date: Tue, 29 Aug 2000 09:42:09 -0700
From: "Vince Roman" <vinnie@burnsstainless.com>

We are planning on carrying inconel bends in the near future (2-3 mos).  
We could bend inconel in 25 piece minimum lots.  What sizes are you interested in?

Vinnie
Burns Stainless LLC
www.burnsstainless.com
1013 West 18th Street
Costa Mesa, CA 92627
(949) 631-5120, (949) 631-3184 FAX

I am building an exhaust system for a Mazda rotary engine and was wondering
if you sell inconel tube. I am looking for both straight and bent tubing. If
you do not, would it be possible to bend inconel if I provide it? Thank you
Brian Trubee

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org