Ed Anderson wrote:
Yes, Paul.
I mix oil with the gasoline. However, the fuel in my tank has been
sitting there since I last flew in April. I wouldn't think that the oil
would settle out of suspension over time and you would have thought that
flooding the chambers with gasoline would have left its own oil deposite on
the metal. Since the engine has sat for months before without being run
without any problem and the only thing different this time was the severe
flooding I am inclined to think there is a connection.
If only one or two apex seals had stuck I might have looked for another
cause. But, in this case all the apex seals are failing to provide
compression. There is not a single rotor face that gives that "PoP" of air
as it rotates past the exhaust.
I plan on tearing the engine down and will report on what I find.
Ed
One other thing Ed. I have been meaning to do this myself for quite
some time but have not got around to it yet. Put a sample of the
oil fuel mix you use in a glass jar, let it sit and see if
the oil separates.
Paul Lamar
Ken Powell wrote:
Paul,
This is a really good test that I used to perform every time I tried a
different 2-stroke oil. The only oil that I found that would separate
was Caster 'bean' oil, a varient of the stuff that model airplane guys
run. Belray and Golden Spectro would not separate. I tried several
other oils thru the years but these are the only ones that I remember.
Ken P.
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org